Absen Absenicon X108 108" Touch All-in-One LED Conference Display

The Absenicon X108 is a complete 108-inch all-in-one direct-view LED display built by Absen for boardrooms, meeting rooms and showrooms. Rather than a bare cabinet order, it arrives as a matched kit - LED modules, controller box, power supply, audio and mounting hardware - so there is no separate processor to specify and no on-site cabling and calibration to schedule. Flip Chip COB Micro LED at a 1.25 mm pitch fills an active area of 2400 x 1350 mm with a native Full HD 1920 x 1080 picture.

Absen rates the panel at 600 nits with a 15,000:1 contrast ratio and 90% BT2020 colour coverage, and drives it at a 3840 Hz refresh rate so the screen stays free of banding and flicker when a room camera is pointed at it - the point at which a lot of hybrid meeting rooms come unstuck. Viewing angle is 160 degrees horizontally and vertically, two 15 W speakers are built in, and the panel-level COB encapsulation gives the surface a hard, sealed finish that shrugs off the knocks a screen at eye level in a busy office will collect. Modules are serviced from the front and Absen quotes a 100,000-hour service life. This is the touch version, fitted with Absen's high-precision infrared touch frame: 20 simultaneous touch points at plus or minus 1 mm accuracy, with gesture support for annotation and whiteboarding.

A quad-core 64-bit controller running Android 11.0 with 4 GB of memory and 32 GB of storage handles wireless casting from phones and laptops out of the box, and a Windows machine can be added later through the optional OPS slot. Control is over RJ45 or RS232 and the screen is listed as compatible with Crestron, Extron and Yealink room systems. The chassis is modular so it can be carried into a building and up a lift in sections, and it can be wall mounted, put on a mobile stand or fitted to Absen's electric height-adjustable bracket. Overall size is 2442 x 1426 x 39.3 mm (W x H x D) and the touch version weighs 94.8 kg net.